B&B Electronics EIR505-XX - Manual (Page 32)

22
Manual Documentation Number: EIR505-xx_5107m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Port Control
Used to set up the port.
1. Select the port by scrolling down the Port column. The current port
information will be displayed in the table below.
2. State: Enables or disables the port.
3. Negotiation: Sets the negotiation mode to Auto, Nway (specify the
speed/duplex of the port and enable auto-negotiation), or Forced.
4. Speed: Sets the transmit speed of the port
5. Duplex: Sets the port to full-duplex or half-duplex
6. Flow control: Sets flow control function to Symmetric or Asymmetric
in Full Duplex mode(The default value is Disable)
7. Click the Apply button to apply configurations
8. Select the port again to verity the configuration.
[NOTE] If the configuration is not saved it will be lost when the switch
is powered off.
Port Control interface