B&B Electronics EIR505 Series - Manual

EIR505 Series-5107qsg
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] [email protected]
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445 www.bb-europe .com [email protected] [email protected]
Quick Start Guide
Elinx Managed Ethernet Switch
EIR505 Series
Items Included
1
2
Default Settings
3
DIP Switch Settings
4
LED Chart
5
Hardware Installation
o Ethernet Switch
o CD with Support Manual
o This Quick Start Guide
o Panel Mount Bracket
o IP Address: 192.168.16.1
o Subnet Mask: 255.255.255.0
o
Gateway: 192.168.15.254
o User Name: root, Password: root
o Record the switch’s MAC Address in the space
provided. The MAC Address is printed on the product
label. Provide the MAC Address to your Network
Administrator. The Network Administrator should
provide an IP Address, Subnet Mask, and Gateway.
o
Select a mounting location and install with the attached
DIN rail clip or included panel mount kit.
o Connect power to the switch
o
12 to 48 VDC
o Redundant DC input is available with fault
contacts.
Pos Status Description
OFF
Disable port 1 Alarm
1
ON
Enable port 1 Alarm
(If port 1 link fails, the fault LED will light)
OFF Disable port 2 Alarm
2
ON
Enable port 2 Alarm
(If port 2 link fails, the fault LED will light)
OFF Disable port 3 Alarm
3
ON
Enable port 3 Alarm
(If port 3 link fails, the fault LED will light)
OFF Disable port 4 Alarm
4
ON
Enable port 4 Alarm
(If port 4 link fails, the fault LED will light)
OFF Disable port 5 Alarm
5
ON
Enable port 5 Alarm
(If port 5 link fails, the fault LED will light)
OFF Disable the ring master function
6
ON
Enable the switch as the ring master
in the redundant ring group.
LED Status Meaning
Green The switch is powered on
Power
Off The switch is powered off
R.M. Green Ring Master (Master of a Redundant Ring)
(Ring Master) Off The switch is not a Ring Master
Green Power Source 1 is available
Power 1
Off Power Source 1 is unavailable
Green Power Source 2 is available
Power 2
Off Power Source 2 is unavailable
Yellow Power Source Failure or Port Failure
Fault
Off Normal Operation
Green The port is linked
Blinking The port is receiving or transmitting packets
Link/ACT
Port 5
Off No device attached
Yellow Full Duplex Mode
Blinking Data Collision
FDX/COL
Port 5
Off Half Duplex Mode