Before using network scanning, Network license – Brother MFC-8460N User Manual
Page 84
78
4
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel (See the Network User’s Guide on the CD-ROM).
If you installed the machine following the instructions for a network user in the Quick Setup Guide then the
machine should already be configured for your network.
Before using Network Scanning
4
Network license
4
This product includes a PC license for up to 5 Users.
This license supports the installation of the MFL-Pro Software Suite including ScanSoft
®
PaperPort
®
on up
to 5 PCs for use on a network.
If you want to use more than 5 PCs with ScanSoft
®
PaperPort
®
installed, please buy NL-5 which is a multiple
PC license agreement pack for up to 5 additional users. To buy NL-5, contact your Brother Sales Office.
Note
• Max. of 25 clients can be connected to one machine on a network. For example, if 30 clients try to connect
at a time, 5 of those clients will not be shown on the LCD.
• If your PC is protected by a firewall, and is unable to scan, you may need to configure the firewall settings
to allow communication through port number 137 and 54925. Visit the Brother Solutions Center
more information.
• Network Scanning is not supported in Wndows NT
®
.
Network Scanning (For models with
built-in network support)
4