Brother MFC-8460N - Manual (Page 155)

9. Scanning
149
Using the Scan key
(For USB cable users Mac OS
®
10.2.4 or greater)
9
Note
• If you use the Scan key on a network, see Using the Scan key on page 175.
• The Scan key features are not supported in Mac OS ® 9.1 to 9.2.
You can use (Scan) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your Macintosh
®
. The advantage of using (Scan) is that you avoid
the mouse clicks needed to scan from your Macintosh
®
.
Before you can use (Scan) on the control panel, you have to install the Brother MFL-Pro suite and
connect the machine to your Macintosh ® . If you installed the MFL-Pro Suite from the included CD-ROM then
the correct drivers and the ControlCenter2 are installed. Scanning by (Scan) follows the
configuration on the Device Button tab of the ControlCenter2. (See SCAN on page 159.) For details about
how to configure the scan settings of the ControlCenter2 buttons and to launch the application of your choice
using (Scan), see SCAN on page 159.
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
Choose your document layout from following table:
Document Layout Table
Note
• Duplex scan is supported by the MFC-8670DN, MFC-8860DN, MFC-8870DW and DCP-8065DN only.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
Portrait Landscape LCD Message
Front Back Front Back
(L)edge
(Long edge)
Front Back Front Back
(S)edge
(Short edge)