Bay Technical Associates BayStack 304 User Manual
Page 54
Using the BayStack 303 and 304 Ethernet Switches
2-20
893-01010-A
5.
Type 2 in the command line.
This action refreshes the screen and displays the current IP subnet mask
address value.
6.
Enter the IP subnet mask address.
This action refreshes the screen and displays the new IP subnet mask address
value in the field on the menu.
7.
Type 3 in the command line.
This action refreshes the screen and displays the current default gateway
address value.
8.
Enter the default gateway address.
This action refreshes the screen and displays the new value in the field on the
menu.
9.
Type 1 at the System Configuration menu.
The Switch Network Configuration menu is displayed (see
).
From this menu, the IP address and Telnet password can be set.
89301010.BK Page 20 Tuesday, June 10, 1997 8:00 PM