Brother DCP-9010CN - Manual (Page 38)

Chapter 4
30
Adjusting Contrast, Colour
and Brightness
4
Contrast
4
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
a
Load your document.
b
Use the numeric keys to enter the
number of copies (up to 99).
c
Press Options.
Press a or b to choose Contrast.
Press OK.
d
Press a or b to increase or decrease the
contrast.
Press OK.
e
Press Mono Start or Colour Start.
To change the default setting follow the steps
below:
a
Press Menu, 2, 3.
b
Press a or b to increase or decrease the
contrast.
Press OK.
c
Press Stop/Exit.
Brightness
4
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a
Load your document.
b
Use the numeric keys to enter the
number of copies (up to 99).
c
Press Options.
Press a or b to choose Brightness.
Press OK.
d
Press a to make a lighter copy or press
b
to make a darker copy.
Press OK.
e
Press Mono Start or Colour Start.
To change the default setting follow the steps
below:
a
Press Menu, 2, 2.
b
Press a to make a lighter copy or press
b
to make a darker copy.
Press OK.
c
Press Stop/Exit.
Colour saturation
4
You can change the default setting for colour
saturation.
To change the default setting follow the steps
below:
a
Press Menu, 2, 4.
b
Press a or b to choose 1.Red,
2.Green, or 3.Blue.
Press OK.
c
Press a or b to increase or decrease the
colour saturation.
Press OK.
d
Return to step b to choose the next
colour. Or press Stop/Exit.