Brother DCP-9010CN - Manual (Page 18)

Chapter 2
10
c
Fan the stack of paper well to avoid
paper jams and misfeeds.
d
Put paper in the tray, and make sure that
the paper is below the maximum paper
mark (1). The side to be printed on must
be face down.
IMPORTANT
Make sure the paper guides touch the
sides of the paper so it will feed correctly.
If you do not do this, it may cause damage
to your machine.
e
Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.
f
Lift up the support flap (1) to prevent
paper from sliding off the face-down
output tray or remove each page as
soon as it comes out of the machine.
1
1