Brother DCP-9010CN User Manual

Page 22

Chapter 2

Note

• Put the paper into the manual feed slot

with the side to be printed face up.

• Make sure that the paper or print media

(see Acceptable paper and other print
media on page 16) is straight and in the
correct position on the manual feed slot. If
it is not, the paper may not be fed
correctly, resulting in a skewed printout or
a paper jam.

• Do not put more than one sheet of paper

in the manual feed slot at any one time, as
it may cause a jam.

• Pull the paper out completely when you

retry putting the paper into the manual
feed slot.

• If you put paper or other print media in the

manual feed slot before the machine is in
the Ready mode, an error may occur and
the machine will stop printing.

• To easily remove a small printout from the

output tray, lift up the scanner by using
both hands as shown in the illustration.

• You can still use the machine while the

scanner is up. To close the scanner, push
it down with both hands.

• When the top cover is open, you cannot

open the scanner.