Brother PC 3000 - Manual (Page 95)

92
This message is displayed when a buttonhole pat-
tern is selected and the “START/STOP” or “RE-
VERSE STITCH” button is pushed while the but-
tonhole lever is raised.
* In this case, the machine can only rotate once.
This message appears when the “START/STOP”
or “REVERSE STITCH” button is pushed, but no
pattern has been selected.
This message appears when the “MEMORY” key
is touched to store a pattern.
This message appears while the bobbin is wind-
ing.
• When operating correctly : 1 beep
• When operating incorrectly : 2 beeps or 4 beeps
Messages
Alarm
This message appears when trying to combine
stitches that cannot be combined.
This message appears when a memory stitch
number is entered, but no pattern has been stored
under it.