Sewing chapter 2, Trial sewing – Brother PC 3000 User Manual
Page 31

28
1. SEWING
CHAPTER 2
TRIAL SEWING
Sewing using a utility stitch
CAUTION
–
Be aware of the needle at all
times while sewing, and keep
your hands away from all
moving parts such as the
needle, balance wheel and
thread take-up lever, otherwise
an injury may result.
–
Do not pull or push the fabric
too hard while sewing, otherwise
injury may result.
–
Never use bent needles. Such
needles can easily break, which
could result in injury.
1. Turn on the sewing machine. The straight stitch (left) is se-
lected.
3. While pressing down on the thread and the fabric with your
left hand, turn the balance wheel with your right hand to move
the needle to the sewing start position.
1 Thread
*
You can begin sewing without drawing up the bobbin thread.
2. Place the fabric under the presser foot, then pull out about 5
cm (2") of the upper thread and pass it under the presser foot
toward the rear of the machine.
1 Upper thread
2 5 cm (2")
1
2
6
1
3
4
5
2
- XL 2600i (82 pages)
- PE-770 (88 pages)
- PE-770 (2 pages)
- PE-770 (40 pages)
- SE-400 (16 pages)
- LS-2125i (2 pages)
- LS-2125i (67 pages)
- CS-6000i (68 pages)
- CS-6000i (2 pages)
- CE-5000PRW (68 pages)
- LX-3125 (96 pages)
- SE-400 (24 pages)
- 3034D (76 pages)
- 3034D (2 pages)
- HE 120 (183 pages)
- Innov-IS 500D (12 pages)
- CS-8060 (116 pages)
- CS 80 (115 pages)
- PC-420 (153 pages)
- NX-400 (153 pages)
- NX-200 (111 pages)
- PC-210 210PRW (2 pages)
- PC-210 210PRW (111 pages)
- Innov-IS 4000D (8 pages)
- Boutique 27 37 (111 pages)
- 2340CV (21 pages)
- 2340CV (40 pages)
- DS-120 (100 pages)
- PE-700II 750DUSB (40 pages)
- Innov-is 2200 (48 pages)
- NX-2000 (40 pages)
- NX-2000 (88 pages)
- NX-2000 (2 pages)
- 885-X08 (104 pages)
- PR-600 600C (20 pages)
- INNOVIS 500 (8 pages)
- PS-21 (46 pages)
- PC 6500 (140 pages)
- PE-750D (40 pages)
- XL-6061 (101 pages)
- XL-5051 (45 pages)
- BAS-326F-0 (81 pages)
- CS 100T (67 pages)
- EX 660 (67 pages)
- XL-5010 5020 5030 (82 pages)