Brother PC 3000 - Manual (Page 38)

35
STRAIGHT STITCHES
00: Straight stitch (center needle position) for normal sewing
01: Straight stitch (left needle position) for normal sewing
02: For reinforced sewing
03: For stretch fabric
1. Baste or pin the fabrics together.
2. Attach presser foot “J”, sew three or four reverse stitches at
the beginning, then start sewing.
1 3 to 4 reverse stitches
* Place the fabric under presser foot allowing enough space
from the edge for reverse sewing.
3. Sew at a slow speed as you approach the end of the sewing
area, then press the “REVERSE STITCH” button to sew sev-
eral reverse stitches and stop the machine.
* Before sewing, touch the automatic reinforcement stitching
key to sew reverse stitches or reinforcement stitches auto-
matically at the beginning and at the end of the stitch.
4. Raise the presser foot, remove the fabric and cut the thread.
1 Thread cutter
2. UTILITY STITCHES
J
6
1
5
6
5
00 01 02 03
1