Attaching buttons with four holes, Attaching a shank to the button – Brother PC 3000 User Manual

Page 59

Text mode
Original mode

Attaching buttons with four holes

First, sew the two holes which are closest to you. Once they have
been sewn, raise the presser foot, move the needle to the other
two holes, and then sew them in the same way.

Attaching a shank to the button

1. Pull the shank lever toward you, then start sewing.

1 Shank lever

2. Hold the two ends of the upper thread, which are between the

button and the fabric, wind them around the shank, and then
securely tie them together.

3. Tie the ends of the bobbin thread together at the reverse side

of the fabric.