Brother PC 3000 - Manual (Page 33)

30
AUTOMATIC REINFORCEMENT STITCHING
1. Select a stitch, then touch the automatic rein-
forcement stitching key to change it to black.
* The reinforcement stitching is automatically
sewn when some stitches such as the button-
hole and bar tack are selected.
2. Press the “START/STOP” button to sew rein-
forcement stitches (reverse stitches if the
straight stitch was selected) automatically, then
start sewing.
* To pause sewing, press the “START/STOP” but-
ton. If the sewing is paused, the ending rein-
forcement stitches will not be sewn automati-
cally.
3. To finish the stitch, press the “REVERSE
STITCH” button to sew ending reinforcement
stitches (reverse stitches if the straight stitch was
selected) automatically before the machine
stops.
1 The machine automatically stops.
Touch the automatic reinforcement stitching key to
change it back to white.
Before beginning to sew, touch this key to sew reinforcement stitches (reverse stitches if the straight stitch
was selected) automatically at the beginning of the stitch when the “START/STOP” button is pressed and at
the end of the stitch when the “REVERSE STITCH” button is pressed.
Cancelling automatic reinforcement stitching
1
START
STOP
0 1 2 3
5 6 7 8