Brother PC 3000 - Manual (Page 41)

38
OVERCASTING STITCHES
05: For stretch fabric
06: For thin and medium fabric
07: For thick fabric
08: For medium, thick and easily frayed fabric
09: For stretch fabric
Sew the fabric with the fabric edge against the guide of presser
foot “G”.
1 Guide
* Before sewing, touch the automatic reinforcement stitching
key to sew reinforcement stitches automatically at the begin-
ning and at the end of the stitch.
CAUTION
After the stitch width has been adjusted,
turn the balance wheel by hand and check
that the needle does not touch the presser
foot.
If it does touch, the needle may break and
cause an injury.
Sewing using stitch
06
,
07
or
08
Attach presser foot “J” and let the needle drop slightly past the
edge of the fabric before starting sewing.
* Before sewing, touch the automatic reinforcement stitching
key to sew reinforcement stitches automatically at the begin-
ning and at the end of the stitch.
Sewing using stitch
05
or
09
06 07 08 09 05
G J
6
1
5
G