Nokia N73 - Manual (Page 93)

Tools
92
If you select When needed , the device uses a packet data
connection only if you start an application or action that
needs it.
Access point —The access point name is needed to use your
device as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your (U)SIM card. You can
save these settings to your device, view, or delete them in
Configs. .
SIP settings
SIP (Session Initiation Protocol) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your network operator
or service provider. You can view, delete, or create these
setting profiles in
SIP settings .
Date and time
See "Clock settings," p. 44, and language settings in
"General," p. 88.
Security
Phone and SIM
PIN code request —When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See "Glossary of PIN and
lock codes," p. 93.
PIN code , PIN2 code , and Lock code —You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See "Glossary of PIN
and lock codes," p. 93.
Avoid using access codes similar to the emergency numbers
to prevent accidental dialing of the emergency number.
Autolock period —You can set an autolock period, a time-out
after which the device automatically locks. To turn off the
autolock period, select
None .
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press .
A list of commands opens. Select Lock phone .