Nokia N73 - Manual (Page 65)

Mak
e calls
64
Select a participant, and select Private . The conference
call is put on hold on your device. The other participants
can still continue the conference call. After you finish
the private conversation, select
Options > Add to
conference to return to the conference call.
To drop a participant, select Options > Conference >
Drop participant , scroll to the participant, and
select Drop .
4 To end the active conference call, press .
1-touch dial a phone number
To activate1-touch dialing, press , and select Tools >
Settings > Call > 1-touch dialing > On .
To assign a phone number to one of the 1-touch dialing
keys (
— ), press , and select Tools > Spd. dial .
Scroll to the key to which you want to assign the phone
number, and select
Options > Assign . is reserved for
the voice mailbox.
To call in the standby mode, press the 1-touch dial key
and
.
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags
in advance. Instead, the device creates a voice tag for
the entries in contacts, and compares the spoken voice tag
to it. The voice recognition in the device adapts to the
main user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that
is saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select
Options >
Play voice tag .
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use.
Hold the device at a short distance away when you say
the voice tag.
1 To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a compatible
headset with the headset key, press and hold the headset
key to start voice dialing.