Nokia N73 - Manual (Page 90)

Tools
89
Active standby apps. —Select the application shortcuts
you want to appear in the active standby. This setting
is only available if
Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo —This setting is only available if you have
received and saved an operator logo. Select Off if you
do not want the logo to be shown.
Display
Light sensor —Press or to change the light sensor
mode, and to brighten or darken the display.
Power saver time-out —Select the time-out period after
which the power saver is activated.
Light time-out —Select a time-out after which the backlight
of the display is switched off.
Call settings
Send my caller ID —You can set your phone number to be
displayed to ( Yes ) or hidden from ( No ) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(
Set by network ) (network service).
Call waiting —If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(
Activate ) or off ( Cancel ), or check whether the function
is activated ( Check status ).
Reject call with SMS —Select Yes to send a text message
to a caller informing why you could not answer the call.
See "Answer or decline a call," p. 65.
Message text —Write a text to be sent in a text message
when you decline a call.
Automatic redial —Select On , and your device makes
a maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call —Activate this setting if you want
the device to briefly display the approximate duration
of the last call.
1-touch dialing —Select On , and the numbers assigned to
the 1-touch dialing keys ( - ) can be dialed by pressing
and holding the key. See also "1-touch dial a phone
number," p. 64.
Anykey answer —Select On , and you can answer an incoming
call by briefly pressing any keypad key, except , ,
, and .