Nokia N73 - Manual (Page 22)

Ca
mer
a
21
Default image name —Define the default name for the
captured images.
Extended digital zoom (main camera only)—Select On to
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select
Off .
Capture tone —Select the tone you want to hear when
you take a picture.
Memory in use —Select where to store your images.
Restore camera settings —Select OK to return the default
values to the camera settings.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions.
The following flash modes are available for the still image
camera:
Automatic ( ), Red eye reduct. ( ), On ( ),
and Off ( ); and for the video recorder: Video light on
( ).
To change the flash mode, in the active toolbar, select the
desired flash mode.
Setup settings—Adjust color and
lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or videos,
use the scroll key to scroll through the active toolbar,
and select from the following options:
White balance —Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Exposure compensation (images only)—Adjust the exposure
time of the camera.
Color tone —Select a color effect from the list.
Light sensitivity (images only)—Select the light sensitivity
of the camera. The darker the environment, the higher the
light sensitivity should be.
The available settings vary depending on the selected camera.
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
or videos.
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings transfer between
the image and video modes. The setup settings return to
the default settings when you close the camera.