Nokia E61 - Manual (Page 70)

To select the profile that is used by default when you make net calls, select Preferred profile , and press the joystick. Scroll to the
desired profile, and press the joystick.
Register profiles
Only those profiles where you have selected Registration
>
When needed setting in Menu
>
Tools
>
Settings
>
Connection
>
SIP
settings are shown in the list.
To change the registration of your net telephone profiles, scroll to the profile that you want to register or unregister, and press
the joystick. Press the joystick again to select Registered or Not registered .
To save your settings, select Back .
Voice commands
Select Menu
>
Tools
>
Voice commands .
Use voice commands to make phone calls and to launch applications, profiles, or other functions on the device.
The device creates a voice tag for the entries in the contacts list and for the functions designated in the
Voice commands
application. When a voice command is spoken, the device compares the spoken words to the voice tag in the device.
Voice commands are not dependent on a speaker’s voice; however, the voice recognition in the device adapts to the main user’s
voice to better recognize voice commands.
Make a call
The voice tag for a contact is the name or nickname that is saved on the contact card in Contacts . To listen to the voice tag, open
a contact card, and select Options
>
Playback .
1. To make a call using a voice command, press and hold the voice key.
2. When you hear the tone or see the visual display, clearly speak the name saved on the contact card.
3. The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name
and number. After a timeout, the device dials the number. If the recognized contact was not correct, select Next to view a
list of other matches or Quit to cancel dialing.
If several numbers are saved under the contact, the device selects the default number, if it has been set. Otherwise, the device
selects the first available number of the following fields: Mobile , Mobile (home) , Mobile (business) , Telephone , Tel. (home) , and
Tel. (business) .
Launch an application
The device creates voice tags for the applications listed in the Voice commands application.
To launch an application using a voice command, press and hold the voice key, and clearly speak the voice command. If the
recognized application was not correct, select Next to view a list of other matches or Quit to cancel.
To add more applications to the list, select Options
>
New application .
To change the voice command of an application, scroll to the application, and select Options
>
Change command . Type the new
voice command, and select OK .
Change profiles
The device creates a voice tag for each profile. To set on a profile using a voice command, press and hold the voice key, and say
the name of the profile.
To change the voice command, scroll to the desired profile, and select
Profiles
>
Options
>
Change command .
Voice command settings
To switch off the synthesizer that plays recognized voice commands in the selected device language, select Settings
>
Synthesiser
>
Off .
To reset voice recognition learning when the main user of the device has changed, select Reset voice adapts. .
M a k e c a l l s
Copyright © 2006 Nokia. All Rights Reserved. 38