Nokia E61 - Manual (Page 66)

• Swap — Alternate between an active and a held call (network service).
• Send DTMF — Send DTMF (dual tone multi-frequency) tone strings, for example, passwords. Enter the DTMF string or search
for it in Contacts , and select DTMF .
• Transfer — Connect the held call to the active call and disconnect yourself from the call (network service).
The available options may vary.
Divert calls
Select Menu
>
Tools
>
Settings
>
Call divert .
Divert incoming calls to your voice mailbox or to another phone number. For details, contact your service provider.
1. Select a call type from the following:
• Voice calls — Incoming voice calls.
• Data and video calls — Incoming data and video calls.
• Fax calls — Incoming fax calls.
2. Select one of the following call diverting options:
• All voice calls , All data and vid. calls , or All fax calls . — Divert all incoming voice, data and video, or fax calls.
• If busy — Divert incoming calls when you have an active call.
• If not answered — Divert incoming calls after your device rings for a specified period of time. Define the time you let the
device ring before diverting the call in the Delay time: field.
• If out of reach — Divert calls when the device is switched off or out of network coverage.
• If not available — Activate the last three settings at the same time. This option diverts calls if your device is busy, not
answered, or out of reach.
3. Select Activate .
To check the current diverting status, scroll to the diverting option, and select Options
>
Check status .
To stop diverting voice calls, scroll to the diverting option, and select Options
>
Cancel .
Call barring
Call barring and call diverting cannot be active at the same time.
When calls are barred, calls still may be possible to certain official emergency numbers.
Select
Menu
>
Tools
>
Settings
>
Call barring .
You can bar the calls that can be made or received with the device (network service). To change the settings, you need the
barring password from your service provider. Call barring affects all calls, including data calls.
To bar calls, select
Cellular call barring and select from the following options:
• Outgoing calls — Prevent making voice calls with your device.
• Incoming calls — Bar incoming calls.
• International calls — Prevent calling to foreign countries or regions.
• Incoming if abroad — Bar incoming calls when outside your home country.
• Intern. except home — Prevent calls to foreign countries or regions, but to allow calls to your home country.
To check the status of voice call barrings, scroll to the barring option, and select Options
>
Check status .
To stop all voice call barrings, scroll to a barring option, and select Options
>
Cancel all barrings .
Net call barring
To bar net calls, select Menu
>
Tools
>
Settings
>
Call barring
>
Internet call barring .
To reject net calls from anonymous callers, select Anonymous calls
>
On .
Send DTMF tones
You can send dual tone multi-frequency (DTMF) tones during an active call to control your voice mailbox or other automated
phone services.
To send a DTMF tone sequence, make a call, and wait until the other end answers. Select
Menu
>
Options
>
Send DTMF . Type the
DTMF tone sequence, or select a predefined sequence.
To attach DTMF tone sequences to contact cards, select
Menu
>
Contacts . Open a contact, and select Options
>
Edit
>
Options
>
Add detail
>
DTMF . Enter the tone sequence. Press * three times to insert p, a pause of about 2 seconds before or between DTMF
tones. Select Done . To set the device to send the DTMF tones only after you select Send DTMF during a call, press * four times to
insert w.
M a k e c a l l s
Copyright © 2006 Nokia. All Rights Reserved. 34