Toshiba Tecra M3 - Manual (Page 96)

4-26 User’s Manual
Operating Basics
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialing properties.
Connecting
To connect the modular cable, follow the steps below.
1. Plug one end of the modular cable into the computer’s modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Connecting the internal modem
If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.
The modular cable that comes with the computer must be used to connect
a modem. Connect the end of the modular cable with the core to the
computer.
■ In case of a lightning storm, unplug the modular cable from the
telephone jack.
■ Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
Telephone jack Modem jack Modular cable
Do not pull on the cable or move the computer while the cable is
connected.