Toshiba Tecra M3 - Manual (Page 128)

6-14 User’s Manual
Power and Power-Up Modes
6. Slide and hold the battery release latch (➁) to disengage the battery
pack, then remove the battery pack (➂).
Releasing the battery pack
7. Return your computer to the upright position.
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack (➀).
Battery pack
Battery release
latch Battery lock
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.
■ The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
■ Do not touch the battery release latch while holding the computer.
Or you may get injured by the dropped battery pack by unintentional
release of the battery release latch.