Toshiba Tecra M3 - Manual (Page 88)

4-18 User’s Manual
Operating Basics
Data Verification
To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Click the Options button ( ) on the RecordNow! Console to open
the Options panels.
2. Select the Data in the left-side menu.
3. Mark the Verify data written to the disc after burning check box in the
Data Options.
Click the OK button.
DLA for TOSHIBA
Note the following limitations when you use DLA:
■ This software supports only rewritable discs (DVD+RW, DVD-RW, and
CD-RW). It does not support DVD+R, DVD-R, and CD-R discs that are
not rewritable.
■ DLA does not support formatting a DVD-RAM disc and writing to it.
They are performed by DVD-RAM Driver Software. If DLA Format
menu may appear when inserting a DVD-RAM disc into the drive and
right-clicking the drive icon in Windows Explorer, please use “DVDForm”
to format this disc. You can run “DVDForm” by clicking the start button
on the taskbar to display the start menu and then selecting “All
Programs”, “DVD-RAM”, “DVD-RAM Driver” and “DVDForm”
sequentially.
■ Do not use any discs that have been formatted with packet writing
software other than DLA. Similarly, do not use any discs that have been
formatted with DLA with any packet writing software other than DLA.
When using a disc you are not familiar with, format it by selecting
“Full Format” before using it.
■ Do not use the Cut & Paste function for files and folders. A file or folder
that has been cut may be lost if writing fails due to an error on the disc.
■ When writing the Setup files for the program to a disc formatted by DLA
and starting Setup from this disc, an error may occur. In this case,
please copy them to your hard disk and then run Setup.
Video
As for InterVideo WinDVD Creator Platinum. Only the model that can be
written in to DVD is attached.