Boss Audio Systems GT-6B - Manual (Page 59)

59
Chapter 8 Convenient Features of the GT-6B
Chapter
8
Checking the Effect Output
Level with the Level Meter
You can meter the output level of each effect. This is handy
for checking the effects’ output levels.
1. Press [UTILITY] a number of times until “METER” is
displayed.
* You can also select this by pressing [UTILITY], and then
pressing PARAMETER [ ] [ ].
fig.08-11
2. Rotate the PATCH/VALUE dial to select the effect
whose level you want to check.
* Only effects that are turned on can be selected.
* You can check the level of signals being input to the INPUT
jack by selecting “Input.” Selecting “Output” allows you to
check the level of signals output from the GT-6B.
* You may not be able to achieve the effects adequately if your
output levels are set too high. While checking the meter and
making sure the needle doesn’t fluctuate, adjust the output
level of each of your effects to the optimum value.
3. Press [EXIT] to return to the Play screen.