Boss Audio Systems GT-6B - Manual (Page 11)

11
Panel Descriptions
Rear Panel
fig.00-02
1 INPUT Jack
The bass guitar is connected here.
2 OUTPUT LEVEL Knob
Adjusts the volume level of the output from the output
(1/4” phone) jack and headphone jacks.
3 OUTPUT R/L (MONO) Jacks
These are standard jacks that output unbalanced signals.
Connect to amps, mixers, or other such devices.
4 PHONES Jack
A pair of stereo headphones can be connected to this
jack.
5 OUTPUT Jacks (XLR)
These are XLR jacks that provide balanced output.
6 SELECT (Output Select) Switch (p. 55)
This switch setting determines whether the signals
output from the XLR output jacks are in stereo (L/R), or
as direct mono output.
7 DIGITAL OUT Connector (p. 58)
Outputs digital audio signals.
8 SUB EXP PEDAL/SUB CTL 1,2 Jack
(SUB EXP Pedal/SUB CONTROL Pedal) (p. 48)
Connect an optional expression pedal (such as the EV-5)
or foot switch (such as the FS-5U) here.
9 MIDI IN/OUT Connectors (p. 64)
Connect an external MIDI device to these connectors to
transmit and receive MIDI messages.
10 POWER Switch
Switches the power to the on and off.
11 AC Adaptor Jack
Connect the included AC adaptor (BRC-series) here.
12 Cord Hook
Hook the AC adaptor cord here to prevent the adaptor
plug from becoming disconnected.
1 2 3 4
5 6 7
8 9 10 11 12