Boss Audio Systems GT-6B - Manual (Page 15)

15
Chapter 1 Playing Sounds
Chapter
1
Turning Each of the Effects in a
Patch On and Off
You can use pedals 1–4 to switch on and off the individual
effects that are used in a patch. Each pedal shows the names
of two effects; the effect that you are currently able to switch
on and off is indicated in the lower row of the right display.
You can also change these with [PEDAL ASSIGN] (p. 45).
About the Information Appearing
in the Display
The following information is shown in the display.
fig.01-11
If the Patch Does Not Switch
On the GT-6B, you cannot switch patches in any screen other
than the Play screen. If you are having this problem, press
[EXIT] to return to the Play screen.
Turning Off the Power
1. Before turning off the power, confirm the following.
• Is the volume on the GT-6B, your amp, and all other
connected devices turned down to the minimum level?
2. Turn off the power to the bass amp (power amp) and
other devices.
3. Turn the GT-6B’s power off.
Switching Patches by Specifying the Bank
and Number
The GT-6B has been set at the factory so that you can
switch patches using the PATCH/VALUE dial or the
PATCH and PATCH pedals, but you can change
the settings by switching patches directly with the bank
and number. For more detailed information, refer to p. 60.
Bank
Number Patch Name
Effects