Boss Audio Systems GT-6B - Manual (Page 20)

20
Chapter 2 Creating You Own Favorite Tones (Patches)
Using the Pedal Effects (Wah,
Pedal Bend, Ring Modulator)
You can use the GT-6B’s expression pedal to obtain wah,
pedal bend (pedal-controlled pitch bend), and ring
modulator effects.
Wah
fig.02-11
1. Press [WAH].
2. Turn on the wah effect (“Adding Effects”; p. 18).
* This step is not required if the effect is already on.
3. Press PARAMETER [ ] [ ] to select the FX
Select parameter.
4. Rotate the VALUE dial to change the setting value to
“WH.”
A wah effect can now be obtained by moving the
expression pedal.
* By assigning WAH on/off to the expression pedal switch, you
can switch the wah effect on and off by firmly pressing down
on the pedal’s toe. (p. 46)
5. Press [EXIT] to return to the Play screen.
If you want to save a tone for which you have made
settings, use the Write procedure (p. 23) to save the tone
to a User patch.
Pedal Bend
fig.02-12
1. Press [FX-2].
2. Turn on the FX-2 effect (“Adding Effects”; p. 18).
* This step is not required if the effect is already on.
3. Press PARAMETER [ ] [ ] to select the FX
Select parameter.
4. Rotate the VALUE dial to change the setting value to
“PB.”
Moving the expression pedal now gives you a pitch bend
effect.
* By assigning PB on/off to the expression pedal switch, you can
switch the Pedal Bend effect on and off by firmly pressing
down on the pedal’s toe. (p. 46)
5. Press [EXIT] to return to the Play screen.
If you want to save a tone for which you have made
settings, use the Write procedure (p. 23) to save the tone
to a User patch.
5
4 1
3
5 1
4
3