Pioneer X-SMC5-K - Manual (Page 7)

Connections 02
7
En
English
Français
Español
Chapter 2:
Connections
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting using a video cable
• When an iPod/iPhone is connected to this unit, the TV
output setting of iPod/iPhone is automatically set to
‘ON’.
1
• Do not connect the unit through a VCR. Video signals fed
through VCRs may be affected by copyright protection
systems and the picture will be distorted on the
television.
Connecting using an HDMI cable
By using an HDMI cable, digital signals can be transferred to
an HDMI-compatible TV on a single cable with no loss of
picture or sound quality.
2 After connecting, adjust unit
resolution and HDMI color settings according to the HDMI-
compatible TV. Also refer to the operating instructions with
the HDMI-compatible TV.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other countries.
Connecting to a TV
• If you connect this unit to your television with the HDMI
cable, sound can not be transferred from your television
to this unit. To listen to sound, connect the front panel
AUX IN mini-plug jack to your television.
Note
1 • Some iPod allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone’s TV output setting returns to its original state.
2 • The HDMI OUT terminal does not output any audio signals except DVD/CD sound.
• When playing a disc content, this unit can transfer digital signals by the HDMI OUT terminal. Use the video cable for playing other
content.
• This unit’s interface is designed based on the High-Definition Multimedia Interface specification.
• When an HDMI-compatible device is connected, the resolution is displayed on the front panel display.
• The resolution of video signals output from this unit’s HDMI OUT terminal is changed manually. Change the HDMI Resolution setting
(page 34). Settings for two units can be stored in memory.
• This unit is designed for connection to HDMI-compatible devices. It may not operate properly if connected to DVI devices.
ANTENNA
VIDEO
OUT
DC IN
19 V
FM75 LAN
(10/100)
Yellow
TV
Video cable
(supplied)
To video input
terminals
This unit’s rear panel
ANTENNA
VIDEO
OUT
DC IN
19 V
FM75
HDMI
OUT
LAN
(10/100)
Match the direction of
the plug to the
terminal and insert
straight.
To HDMI input
terminal
HDMI cable
(commercially
available)
TV
This unit’s rear panel
X-SMC5_SYXZT8_En.book 7 ページ ２０１１年７月２８日 木曜日 午後３時２７分