Pioneer X-SMC5-K - Manual (Page 48)

Additional information 15
48
En
The audio files stored on
components on the network,
such as a PC, cannot be
played back. Windows Media Player 11 or
Windows Media Player 12 is not
currently installed on your PC. Install Windows Media Player 11 or Windows Media Player 12 on
your PC (page 27).
Audio files were recorded in formats
other than MP3, WAV (LPCM only),
MPEG-4 AAC, FLAC, and WMA. Play back audio files recorded in MP3, WAV (LPCM only), MPEG-4
AAC, FLAC, or WMA. Note that some audio files recorded in these
formats may not be played back on this unit.
Audio files recorded in MPEG-4 AAC
or FLAC are being played back on
Windows Media Player 11 or
Windows Media Player 12. Audio files recorded in MPEG-4 AAC or FLAC cannot be played
back on Windows Media Player 11 or Windows Media Player 12. Try
using another server. Refer to the operation manual supplied with
your server.
The component connected to the
network is not properly operated. Check whether the component is affected by special
circumstances or is in the sleep mode. Try rebooting the
component if necessary.
The component connected to the
network does not permit file sharing. Try changing the settings for the component connected to the
network.
The folder stored on the component
connected to the network has been
deleted or damaged. Check the folder stored on the component connected to the
network.
Network connections could be
restricted due to the computer’s
network settings, security settings,
etc. Check the computer’s network settings, security settings, etc.
Cannot access Windows
Media Player 11 or Windows
Media Player 12. In case of Windows Media Player 11:
You are currently logged onto the
domain through your PC with
Windows XP or Windows Vista
installed.
In case of Windows Media Player 12:
You are currently logged onto the
domain through your PC with
Windows 7 installed. Instead of logging onto the domain, log onto the local machine.
Audio playback is
undesirably stopped or
disturbed. The audio file currently being played
back was not recorded in a format
playable on this unit. Check whether the audio file was recorded in a format supported by
this unit.
Check whether the folder has been damaged or corrupted.
Even audio files listed as playable on this unit may sometimes not
be played back or displayed (page 43).
The LAN cable is currently
disconnected. Connect the LAN cable properly (page 9).
There is heavy traffic on the network
with the Internet being accessed on
the same network. Use 100BASE-TX to access the components on the network.
When in the DMR mode, depending
on the external controller being used,
playback may be interrupted when a
volume operation is performed from
the controller. In this case, adjust the volume from the unit or remote control.
There is a connection routed through
a wireless LAN on the same network. There may be a shortage of bandwidth on the 2.4 GHz band used by
the wireless LAN. Make wired LAN connections not routed through
a wireless LAN.
Install away from any devices emitting electromagnetic waves on
the 2.4 GHz band (microwave ovens, game consoles, etc.). If this
does not solve the problem, stop using other devices that emit
electromagnetic waves.
Problem Check Remedy
X-SMC5_SYXZT8_En.book 48 ページ ２０１１年７月２８日 木曜日 午後３時２７分