Pioneer X-SMC5-K - Manual (Page 45)

Additional information 15
45
En
English
Français
Español
Disc playback
The Bluetooth wireless
technology device cannot be
connected or operated.
Sound from the
Bluetooth
wireless technology device is
not emitted or the sound is
interrupted.
• Check that no object that emits electromagnetic waves in the 2.4
GHz band (microwave oven, wireless LAN device or Bluetooth
wireless technology apparatus) is near the unit. If such an object
is near the unit, set the unit far from it. Or, stop using the object
emitting the electromagnetic waves.
• Check that the Bluetooth wireless technology device is not too far
from the unit and that obstructions are not set between the
Bluetooth wireless technology device and the unit. Set the
Bluetooth wireless technology device and the unit so that the
distance between them is less than about 10 m* and no
obstructions exist between them.
* The line-of-sight transmission distance is an estimate. Actual
transmission distances supported may differ depending on
surrounding conditions.
• The Bluetooth wireless technology device may not be set to the
communication mode supporting the Bluetooth wireless
technology. Check the setting of the Bluetooth wireless
technology device.
• Check that pairing is correct. The pairing setting was deleted from
this unit or the Bluetooth wireless technology device. Reset the
pairing.
• Check that the profile is correct. Use a Bluetooth wireless technology
device that supports A2DP profile and AVRCP profile.
Problem Check Remedy
Problem Check Remedy
Disc cannot be played or disc
is ejected automatically. Is the disc scratched? Scratched discs may not play.
Is the disc dirty? Wipe the dirt off the disc (page 52).
Is the disc properly slotted? Slot a disc with the label side facing front.
Does the disc have the right region
number? Discs with the region number “2 (including 2)” and “ALL” can be
played on this unit.
Is this unit placed in a humid
location? There could be condensation inside. Wait a while for the
condensation to evaporate. Do not place this unit near an air-
conditioner, etc. (page 51).
Picture is stretched, or
aspect ratio cannot be
switched on TV. Is the aspect ratio properly set on the
connected TV? Refer to the TV’s operating instructions and set the TV’s aspect ratio
properly.
Is TV Screen properly set? Set TV Screen properly (page 34). This setting is available for a disc
content. For movies and images stored in iPod/iPhone, operate your
iPod/iPhone.
During DVD playback,
picture is disturbed or dark. This is not a problem with this unit. This unit supports Rovi copy protection. With some TVs, the picture
may not display properly when playing discs including copy
prevention signals. This is not a malfunction.
Are this unit and TV connected via a
video deck? When this unit and TV are connected via a video deck, this unit’s
analog copy protect function may cause the picture being played
on the video deck not to display properly. Connect this unit and TV
directly.
Is the TV system properly set? The factory default setting is AUTO. If the picture is distorted,
switch the TV system to the one used in your country or region
(NTSC or PAL) (page 51).
Sound and image are
intermittent during disc
playback. Sound volume may be too high. Sound and image may be unsteady if sound volume is set too high;
in this case, lower the sound volume.
Folder or file names are not
displayed or are not properly
displayed. Do the folder of file names contain
more than 14 characters? The maximum number of characters displayable for the folder and
file names on the Disc Navigator is 14.
X-SMC5_SYXZT8_En.book 45 ページ ２０１１年７月２８日 木曜日 午後３時２７分