Initial settings, Changing the settings, Changing the settings 13 – Pioneer X-SMC5-K User Manual
Page 31: English français español chapter 13
Changing the settings
13
31
En
English
Français
Español
Chapter 13:
Changing the settings
Initial settings
The factory default settings are indicated in italic.
1
Press SET UP to show the Initial Setup screen.
2
Use
/ to select the item, then press ENTER.
3
Follow the descriptions on the main display to change the setting.
Settings
What it does
Timer Setting
Setting the wake-up timer and the time the unit will be turned on.
Clock Setting
Clock Display
(On/On (Standby)/Off)
• Select On to show clock on the sub display.
• When On (Standby) is selected, the clock will appear in the sub-display even when the power is
set to Off.
Time Format
(12H/24H)
Select the 12-hour (12H) clock or 24-hour (24H) clock.
Clock Adjustment
(Auto/Manual)
• Select Auto to adjust the clock automatically.
• Select Manual to adjust the clock manually. How to adjust the clock, see page 35.
Time Zone
Default setting is GMT ±0.
Select the time zone of your area. Time Zone can be adjusted only when Clock Adjustment is set to
Auto.
e.g. If you are in Hawaii (GMT -10:00), use
/ to select Hawaii and press ENTER.
Daylight Saving Time
(On/Off)
Select On when daylight saving time is in effect. The time advances 1 hour.
Display Setting
(Level3/Level2/Level1)
Dims or brightens the display.
Netw
ork S
e
tti
ng
Network Type
(Wired/Wireless/Auto)
Select the network connection type.
When Auto is selected, the network type is automatically switched between Wired and Wireless. It
is depending on the occasion when the unit is powered on.
Network Configuration
(Wired Setting/Wireless
Setting)
For details on settings, see page 36.
WPS
(PBC/PIN Input)
WPS connection settings, see page 38.
Friendly Name
The name of this system displayed on a computer or other device connected to the network can be
changed. The factory default name is X-SMC5.
X-SMC5_SYXZT8_En.book 31 ページ ２０１１年７月２８日 木曜日 午後３時２７分