Using the timer, Changing the settings 13, Clock adjustment – Pioneer X-SMC5-K User Manual
Page 35: Timer setting, English français español using the timer
Changing the settings
13
35
En
English
Français
Español
Using the timer
Setting the clock
Setting the clock before using the timer.
1
1
Press SET UP.
The Initial Setup screen is displayed on the main display.
2
Select Clock Setting
Clock Adjustment.
3
Select Auto or Manual.
If you select Manual, go to step 4.
• Auto works only when this unit is connected to the
network. Connect to the network if you want to use
automatic time adjustment.
• Auto can be selected even when not connected to the
Internet, but the clock time will not be automatically
updated.
• In order to use the automatic clock adjustment function,
you must conclude a contract with an Internet service
provider.
4
Use
/// or number buttons to adjust
the clock, then press ENTER.
• Using
/ moves the adjusting digit (hour/minute/
second/AM, PM
2
).
• Using
/ increases or decreases values.
• If you press RETURN, the previous screen will be
displayed.
Setting the wake-up timer
3
1
Press SET UP.
The Initial Setup screen is displayed on the main display.
2
Select Timer Setting.
The Timer Setting screen is displayed.
3
Use
/// or number buttons to adjust
the clock, then press ENTER.
The TIMER indicator lights and the wake-up timer has been
set.
• Using
/ moves the adjusting digit (hour/minute/
AM, PM
2
).
• Using
/ increases or decreases values.
• If you press RETURN, the previous screen will be
displayed.
• The wake-up timer will turn on an input source at the
volume level you selected when you set the timer.
Turning on/off the wake-up timer
4
1
Press
to turn on the timer.
The TIMER indicator lights.
• To turn off the timer, press
during the timer is on.
Using the wake-up timer
1
Set the wake-up timer to on.
2
Press STANDBY/ON to turn the power off.
3
At the wake-up time, this unit will turn on
automatically and play the selected input
function.
If this unit is not operated for 60 minutes or more after
playback is started by the wake-up timer, power will
automatically turn off (standby mode).
Using the sleep timer
The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
•
Press SLEEP repeatedly to select a switch off
time.
Choose between 5 min, 15 min, 30 min, 60 min, 90 min or Off.
5
Note
1 You’ll need to set the clock again if you unplug the unit (or in case of a power failure).
2 The “AM” and “PM” indicators appear only when the Time Format is set to the 12H mode.
3 When the unit is in iPod, FM, Internet Radio, or AUX modes, you can set the timer.
Clock Adjustment
2 21 0 AM
H:M:S AM/PM
4 Timer Setting need to be done before you turn on the timer.
5 The sleep timer can be set by pressing SLEEP while the remaining time is displayed.
Timer Setting
7 0 AM
H:M AM/PM
X-SMC5_SYXZT8_En.book 35 ページ ２０１１年７月２８日 木曜日 午後３時２７分