Pioneer X-SMC5-K - Manual (Page 15)

Getting started 04
15
En
English
Français
Español
Chapter 4:
Getting started
When you use the unit for the first time, the following screens
will be displayed.
Set up the following items to customize the unit.
1 Press STANDBY/ON.
About twenty seconds after turning on the power, the
following splash screen appears. About one minute is
required between turning the power on and completion of
startup.
Setting Quick Start Mode to On will allow faster startup
(page 32).
2 Cancel Demo Mode (Set to normal mode).
The screen below will automatically appear after the screen in
step 1. If the
 STOP is pressed, the operation will proceed to
step 3.
• Press  PLAY button to start the Demo Mode. When
starting up the next time, it will be necessary to set step
3.
• When Demo Mode is selected, the Quick Start Mode
is simultaneously set to On.
• The Demo Mode and Quick Start Mode settings can
also be changed manually in the Option Settings (see
page 32). When Demo Mode is set in step 2, if the
Option Settings menu is subsequently used to cancel
the Demo Mode, the Quick Start Mode will not be
cancelled simultaneously. The two settings must be
changed independently.
3 Use
/ to select the menu language of
this unit, then press ENTER.
• This setting has no effect on the home menu, screen
display, or the language selected for DVD audio or
subtitles. To change those items, consult the
instructions on page 34.
The setting is done.
Select "Start" to start
Demo mode; otherwise
"Cancel".
[PLAY] Start
[STOP] Cancel
Language
Français
Deutsch
Nederlands
English
X-SMC5_SYXZT8_En.book 15 ページ ２０１１年７月２８日 木曜日 午後３時２７分