Pioneer X-SMC5-K - Manual (Page 40)

Changing the settings 13
40
En
Sound settings
Using the Virtual Surround/Sound Retriever
You can add exciting effects to audio sources.
1 Press SOUND to select Virtual Surround or
Sound Retriever.
2 Use
/ to select On or Off, then press
ENTER.
About Sound Retriever
This function enhances sound data lost during compression
of MP3 and other file types, allowing the user to enjoy sound
quality closer to that of the original signal data.
Adjusting the bass and treble
Use the bass and treble controls to adjust the overall tone.
1 Press SOUND to select Bass or Treble.
2 Use / to adjust the bass or treble, then
press ENTER.
You can adjust low and high sounds on a scale of –5 to +5
(eleven steps).
Resetting the system
Use this procedure to reset all system settings to the factory
default.
Important
• Disconnect all components connected to this unit
before the operation.
1 Press STANDBY/ON.
The unit turns on.
2 Press and hold  and STANDBY/ON on
the top panel for three seconds.
The unit turns off (standby mode).
All the settings will be reset to the factory default next time the
unit is turned on.
X-SMC5_SYXZT8_En.book 40 ページ ２０１１年７月２８日 木曜日 午後３時２７分