Pioneer X-SMC5-K - Manual (Page 23)

Disc playback 07
23
En
English
Français
Español
Chapter 7:
Disc playback
Playing discs
1 Press STANDBY/ON to turn the power on.
The selected input is displayed on the front panel display.
• When playing a DVD-Video or DivX discs, turn the TV on
and switch TV input before starting.
• You can change the screen display language of the unit
(OSD Language on page 34).
2 Press FUNCTION / to select DVD/CD as
the input source.
DVD/CD is shown on the main display.
When a disc has been slotted in the disc slot already, press
 EJECT to eject the disc.
3 Slot a disc.
• By using the number buttons (0 to 9), you can specify
and play the title, chapter, track or file you want to view/
listen to.
• Hold the disc as shown in the illustration, insert it in the
center of the disc slot, and press in gently from above.
• The disc will then be automatically drawn into the slot.
• If the disc does not load smoothly, do not attempt to
force it. Remove it from the slot and try inserting it again.
Attempting to force a disc causes damage or
malfunction.
• Do not touch the recording surface of the disc, since the
disc may not play properly if it has fingerprints or other
soiling.
• 8 cm discs cannot be played. Also do not attempt to use
adapters for 8 cm CD to play such discs, since
malfunction may result.
Eject a disc from this unit
• Press  EJECT on the top panel.
Tip
• When no operation has done in DVD/CD mode for more
than 30 minutes, the power will automatically turn off.
Playing in the desired order
(Programmed Play)
1 Press HOME MENU.
The HOME MENU will be displayed on the television screen.
2 Use
/ to select Play Mode, then press
ENTER.
The Play Mode screen is displayed.
3 Use
/ to select Program, then press
ENTER or .
4 Use
/ to select Create/Edit, then press
ENTER.
The Create/Edit screen differs according to the disc or file.
5 Use
/// to select the title, chapter,
track or file, then press ENTER.
• To add to a program, first select the place in the program
(the program step), next select the title, chapter or track,
then press ENTER (files are added at the end of
program).
• Press RETURN to return to the previous screen. If you
return to the previous screen when inputting it, the
settings you have programmed are cleared.
• To delete a step, highlight it and press CLEAR.
6 Press PLAY to start playback.
• To play a program that has already been set, select
Playback Start from the program screen, then press
ENTER.
• To resume normal playback, select Playback Stop from
the program screen, then press ENTER. The program
remains in memory.
• To cancel the entire program, select Program Delete
from the program screen, then press ENTER.
• Programs can be played repeatedly. Select Program
Repeat from Repeat on the Play Mode screen during
programmed playback.
• Programs cannot be played in random order (random
play is not possible during programmed play).
Slot a disc with
the label side
facing front.
Program Step
01.
02.
03.
04.
05.
06.
07.
08.
Title 1-01
Title 01
Program
Chapter 1-015
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
X-SMC5_SYXZT8_En.book 23 ページ ２０１１年７月２８日 木曜日 午後３時２７分