ADC MM701G User Manual
Page 73
Chapter 7: Implementing a Point-to-Point LAN Extension
MM701G and MM702G User Manual
65
Change the LAN IP Address for the Central-Office Modem
Because the Central-Office and Remote modems are on the same IP subnet in this point-to-point
application, you must change the IP address for the Central-Office modem.
1
Select
LAN
on the menu bar to access the
LAN Configuration
page.
2
In the IP address box, enter
10.0.0.2
.
3
Click
Apply
to activate the changes. The connection to the Web interface will be lost
because the modem now has a new LAN IP address.
4
In the Web browser address field (see
), specify
http://10.0.0.2
to reconnect.
5
Click
Save Changes
on the menu bar to prevent losing the configuration after restoring
communication with the modem.
You are now finished with the Quick Installation. To verify connectivity, refer to
Any device (such as a PC) connecting to the modem LAN interface loses its
connection when the modem LAN IP address is changed. After the IP address
is changed, you need to specify this new address in the Web browser to
reconnect a device.