ADC MM701G - Manual (Page 22)

Configure the LAN
14 MM701G and MM702G User Manual
C
ONFIGURE THE
LAN
From the LAN Configuration page, configure the parameters for the
LAN as indicated by your system administrator. The default protocol
for the LAN port is bridged.
1 Select LAN on the menu bar, then select LAN Setup under [LAN Options] to access the LAN
Configuration page.
2 Configure the following parameters:
LAN Protocol
The LAN protocol is set to bridged and cannot be changed through the Web interface.
If you want to change the protocol to routed, use the command-line interface (go to
“Set Up the LAN” on page 104 ).
LAN
LAN Setup