ADC MM701G - Manual (Page 28)

Configure DHCP Server Mode
20 MM701G and MM702G User Manual
• Enabled —The modem functions as a DHCP server and can serve IP addresses, a DHCP
gateway, and a DNS server IP address to devices on your LAN. When the modem
DHCP server is enabled, then LAN clients (such as PCs) must have their Internet
protocol (TCP/IP) set to
Obtain an IP address automatically (see page 19 for an example
of where to select this option).
a Select Enabled , then click Configure to access the following DHCP Server page
(DHCP Server cannot be enabled when the LAN protocol is in bridge mode).
b Configure the following parameters when DHCP server is enabled for the modem:
DHCP Range Low
The lowest IP address value that the modem can serve when configured as a
DHCP Server . A maximum of 20 IP addresses can be served by the modem.
This IP address value is provided by your LAN administrator and must be on
the same subnet as the modem LAN port.
DHCP Range High
The highest IP address value that the modem can serve when configured as a
DHCP Server . A maximum of 20 IP addresses can be served by the modem.
This IP address value is provided by your LAN administrator and must be on
the same subnet as the modem LAN port.