ADC MM701G - Manual (Page 31)

Chapter 3: Configuring the LAN
MM701G and MM702G User Manual 23
C
ONFIGURE THE
E
THERNET
P
ORT
M
ODE
The modem LAN (Ethernet) port must be set the same half- or
full-duplex mode as the NIC (or other Ethernet equipment) that
connects directly to it for management. Determine the mode to
which your NIC (or other Ethernet equipment) is set, then configure
the same mode for the modem LAN port.
1 Select LAN on the menu bar, then select Ethernet Mode under LAN Options] to access the
Ethernet Mode page.
2 Select either Half Duplex or Full Duplex .
LAN
Ethernet Mode