Accessing the commandlineinterface, Ions in, Appendix a – ADC MM701G User Manual
Page 107: Accessing the command-line interface, Appendix a: accessing the command-line interface, Line interface. see, Accessing the, Ccessing, Ommand, Nterface
MM701G and MM702G User Manual
99
A
A
CCESSING
THE
C
OMMAND
-L
INE
I
NTERFACE
You can manage the modem using either the command-line interface or the Web interface.
Access to the command-line interface is accomplished by either direct connection to the modem
console port or through a telnet session (over a network). This section provides instructions for
accessing and using the command-line interface. Access to the Web interface is accomplished
through a Web browser using an internet connection.
provides instructions on accessing and using the Web interface for
management.
The Web interface is the more comprehensive of the two management interfaces and generally
simpler to use. There are situations, however, in which using the command-line interface is
preferred over the Web interface. For example, if you cannot connect to the modem through the
DSL line and 10Base-T port, you can still manage the modem through the console port.
The following sections describe how to use the command-line interface:
Section
Page
Access through a Telnet Session