Saving changes, Aving, Hanges – ADC MM701G User Manual
Page 61
Chapter 5: Configuring System Parameters
MM701G and MM702G User Manual
53
S
AVING
C
HANGES
Use the
Save Changes
page for saving your current configuration to
flash memory. This option immediately writes all current system
configuration to permanent memory (NVRAM). You cannot selectively write configuration to
NVRAM. When you issue the save command, all current configuration is written to NVRAM.
1
Select
Save Changes
on the menu bar to access the
Save Changes
page.
When saving the modem configuration, do not power off the modem while the
save is in process.
Save Changes
This manual is related to the following products: