Accessing the webinterface for modem management, Step 1— assign ip addresses, Assign ip addresses – ADC MM701G User Manual
Page 15: Ccessing, Nterface for, Odem, Anagement, Ip a
MM701G and MM702G User Manual
7
2
A
CCESSING
THE
W
EB
I
NTERFACE
FOR
M
ODEM
M
ANAGEMENT
Use the Web interface as the most comprehensive and convenient way to set up and manage the
modem. This chapter provides steps to help you access the Web interface pages for
configuration and management of the modem.
Access to the command-line interface is available through the modem console port or over
a network using a telnet session. Not all configuration and management features, however,
are supported through the command-line interface. See
Command-Line Interface” on page 99
for instruction on using the command-line interface for
configuration and management.
S
TEP
1—A
SSIGN
IP A
DDRESSES
To access the modem Web interface, the management PC must be on the same LAN IP subnet
as the modem. Default values are shown to the right. Do one of the following:
•
Change the management PC IP address so that it is on the
same subnet as the modem (go to
and begin with
•
Change the IP address of the modem 10Base-T (LAN) port
to a value assigned by your network administrator using the
command-line interface (go to
Modem Defaults
Subnet
10.0.0.0
Subnet Mask
255.255.255.0
IP Address
10.0.0.1