Permanently save sessions – ADC MM701G User Manual
Page 124
Manage WAN Sessions
116
MM701G and MM702G User Manual
PPP Authentication
Enter
13
then select the authentication protocol provided by your service provider for
PPP sessions. The authentication protocol type must match at the modem and the
service provider. The options are:
•
1
—
NO Authentication
is required for the session.
•
2
—
PAP
where the modem sends authentication requests to the service provider
and authentication occurs only once during the life of the link.
•
3
—
CHAP
where the service provider returns an authentication challenge to the
modem during the authentication.
User Name
Enter
14
then type the login name for this PPP session to the
Login
name supplied by
the service provider. Minimum login name length is one character and the maximum
is 32 characters.
User Password
Enter
15
then type the login password for this PPP session to the
Login
password
supplied by the service provider. Minimum password length is six characters and the
maximum is 32 characters.
2
Enter
16
to
Apply new setting
to add the new RFC1483 bridged session to your session list.
Or, you can Enter
17
to
Delete session
.
Permanently Save Sessions
After you have set up all the WAN sessions, select
Save Current configuration
from the
System
Management
“Saving the Current Configuration” on page 131
or the
changes will be lost if you reboot or power cycle the modem.