Xerox WorkCentre M45-4033 - Manual (Page 90)

Quick Reference Guide Page 5-11
Fa
x Bound Originals
Use this option to program which page or pages of a bound document are to be
scanned and faxed.
The bound original is placed face down on the Document Glass with the spine of
the book lined up with the marker on the rear edge of the glass. Align the top of the
bound original against the rear edge of the document glass. Do not close the
document handler during the faxing process.
HINT: If necessary, apply a little pressure to the centre of the book to flatten it
during scanning.
Options:
Off The feature is switched off.
Right Page Faxes only the page on the right when looking at the open book, face up.
Left Page Faxes only the page on the left when looking at the open book, face up.
Both Pages Faxes both pages of an open book, in left to right order when looking at the open
book face up. Each page is placed on a separate sheet of paper.
Binding Erase Erases a specified area from the centre of the book to eliminate unwanted marks
caused by scanning the binding area. Up to 1.0 inch can be erased.