Xerox WorkCentre M45-4033 - Manual (Page 65)

Page 4-16 Quick Reference Guide
Image Shift
This feature enables the position of the image on the page to be adjusted.
Options:
No Shift The image position is not adjusted.
Auto Center Use to automatically center the scanned image on the output paper.
Margin Shift Use to create a binding edge for the document. The image can be adjusted up or
down on the page and/or shifted to the right or left. Use the scroll buttons to adjust
the amount of shift. The image can be shifted between 0.0 and 2.0 inches, in 0.05in.
increments.
Margin Shift options are as follows:
S IDE 1 Shifts the image on Side 1.
S IDE 2
Shifts the image on Side 2. The shift on Side 2 can be set to
mirror the shift on Side 1 or adjusted independently.