Xerox WorkCentre M45-4033 - Manual (Page 31)

Page 2-6 Quick Reference Guide
The following options are available for the WorkCentre:
Document
Handler
Feeds single or double sided documents. Fitted instead of the Document Cover.
Document
Glass Cover
Fitted instead of the Document Handler.
High Capacity
Feeder
Holds Paper Trays 3 and 4. Both Trays have a larger capacity than Trays 1 and 2,
therefore reducing the number of times you need to replace paper in the machine.
Offset Catch
Tray
Delivers output either face up or face down, collated or uncollated. Each set or
stack will be offset from the previous to enable easy separation. Fitted instead of
the Finisher.
Finisher Delivers output to the Top Tray when no finishing option is selected, or to the
Stacker to collate, stack, staple and hole punch your output. In addition a walk-up
off-line stapler is also available. Fitted instead of the Offset Catch Tray.
2 Hole Punch
and 3 Hole
Punch
Your finisher is delivered with either a 2 Hole Punch or a 3 Hole Punch kit,
depending on the selection made when the Finisher was ordered. The Hole Punch
kits can also be purchased separately to provide more options if required.
Foreign
Interface
Device
Enables the attachment of a third party access and accounting device, such as a
card or coin operator.
Fax Line 1 Provides a single telephone line connection.
Fax Line 2 Provides a second telephone line. Once installed enables your machine to send
and receive faxes at the same time.
Ad Hoc E-mail Offers a reduced selection of E-mail options.
Image
Overwrite
Security
A security feature which provides On Demand Image Overwrite and Immediate
Image Overwrite. Both features offer customers the ability to overwrite the
machine’s hard disk to protect classified or private information.
256MB
Electronic Pre-
Collation
(EPC) Memory
Additional temporary storage area for scanned information.