Power on or off, To power on, To power off – Xerox WorkCentre M45-4033 User Manual
Page 36: Power on or off -3
Quick Reference Guide
Page 3-3
Getting
S
tarte
d
Power On or Off
If Power Off is selected and confirmed, the machine will begin a controlled power
down sequence.
NOTE: The machine remains on for approximately 30 seconds before the power is
terminated.
If there are any jobs in the queue, a second pop-up screen will appear warning that
jobs in the queue will be deleted if the machine is powered off. Confirmation of this
screen will result in the deletion of any jobs in the queue during the power down
sequence.
If Enter Power Save is selected and confirmed, then the machine will immediately
enter the Power Saver Mode appropriate to its configuration. If there are any jobs in
the queue, a second pop-up screen is displayed.
To re-activate the machine when in this mode, touch a button on the touch screen
or control panel.
If Quick Restart is selected and confirmed then the machine will restart. A pop-up
screen will appear warning that any jobs in the queue will be deleted.
If Cancel is selected then the power down options will be cancelled and the
machine will be available for use.
1
To power ON:
¾
Press the ON/OFF switch. The
powering up process takes less
than 3 minutes.
NOTE: Certain functions of the
machine, e.g. copying, will be
available before other functions e.g.
printing.
2
To power OFF:
¾
Press the ON/OFF switch. A
confirmation screen will appear
asking you to select a power
down option.
3