Xerox WorkCentre M45-4033 - Manual (Page 105)

Page 5-26 Quick Reference Guide
Phone List The Phone List can store up to 30 fax numbers. Enter the fax number and select
Phone List. Select an empty number and then Enter Phone List, the number will be
stored. Fax numbers in the Phone List can also be added to the Send List. Entries
displayed in the phone list will not be deleted once a fax job has been completed.
Resolution
The Resolution affects the appearance of the fax at the receiving fax terminal. A
higher resolution yields better quality for photos. A lower resolution reduces
communication time.
Options:
Standard 200 x 100 dpi - Recommend for text documents. It requires less communication
time, but does not produce the best image quality for graphics and photos.
Fine 200 x 200 dpi - Recommended for line art and photos. This is the default resolution
and the best choice in most cases.
P ULSE -T O -T ONE
S WITCH [:]
Use to switch from Pulse dialing to Tone dialing.
W AIT FOR N ETWORK
T ONE D ETECTION [W]
Use to suspend dialing until an expected network tone is
detected.
L OCAL ID [+]
C HARACTER C HECK
[+]
Required as part of some international telephone numbers (in
place of 00).
L OCAL ID [ SPACE ]
C HARACTER C HECK [
]
Used to improve readability. For example, adding spaces to a
telephone number as 1 234 5678 instead of 12345678.