Xerox WorkCentre M45-4033 - Manual (Page 57)

Page 4-8 Quick Reference Guide
Custom Use this option to adjust the height (Y) and the width (X) dimensions for reduction
or enlargement of each dimension independently.
NOTE: Output will NOT be reduced or enlarged proportionally.
Custom options are as follows:
Paper Supply
Use the Paper Supply options to select Auto Paper or a paper tray for the copy job.
Options:
Auto Paper With this option selected the machine chooses the correct paper for the copy job
based on the size of the originals being scanned.
Tray 1 Use this option to select the paper loaded in Tray 1.
L Tray 1 holds 550 sheets of 20lb, substance 20 paper. Weight ranges from 16 -
53lb, substance 16 - 53. Sizes range from 8.5” x 5.5” SEF to 11” x 17” SEF.
Tray 2 Use this option to select the paper loaded in Tray 2.
L Tray 2 holds 550 sheets of 20lb, substance 20 paper. Weight ranges from 16 -
53lb, substance 16 - 53. Sizes range from 8.5” x 5.5” SEF to 11” x 17” SEF.
100%
Produces an image on the copies the same size as the
image on the original.
A UTO %
Automatically fits the image of the original onto the paper
selected.
X50% Y100%
Enables you to customize the width (x) and height (y)
reduction or enlargement to suit your own requirements. A
percentage can also be entered by touching the X box or Y
box and using the keypad.