Xerox WorkCentre 7655-7665-7675-5897 - Manual (Page 41)

Tabs 3-3
Tabs
Features vary on the driver tabs depending on the driver type and installable options.
General Tabs
These driver tabs are accessed through the application’s print dialog. Driver setting changes on these tabs
apply to the open document and application, and are temporary.
Paper/Output
The Paper/Output tab has the most frequently used features. For example, you can choose to print on
two sides of the paper, select specific media on which to print, or delay your print job to a time you
specify. The Paper/Output tab also presents the finishing options, which may include—depending on the
type of finisher you have installed—Collate, Staple, Fold, or Hole Punch options.
Status
If you have enabled the optional Bi-Directional communication for a printer driver, a Status button is
added to the Paper/Output tab. When you click Status, the Status dialog opens and reports specific
information about the printer’s operational status as well as specific information about your print jobs.
See Status Dialog on page 2-23.
Special Pages
The Special Pages tab has features for adding Covers, Inserts, and Exceptions (specifying media/page
characteristics on a per-page basis).
Image Options
The Image Options tab groups together features that are related to image manipulation, such as Reduce/
Enlarge, Lighten/Darken, or Invert Image.
Layout/Watermark
The Layout/Watermark tab contains all features that relate to Page Layout and Watermarks. The
Watermark Editor, which is accessed from the Watermark dialog, enables you to create and customize
text or graphic watermarks.
Advanced
The Advanced tab contains features that infrequently change once the options are set, such as Banner
Sheet, Request Offset, TrueType Font options, and Custom Paper Sizes.